Sean,
It's still working. Just click the mouse on the current screen and get
back to the monitor window. When you're in anything other than the current
monitor session, the CAT "looks" like it's not working, but it is.
I don't know how you have your monitor set up, how many windows you have
active, but you have to have the main screen, the one you resize with
the F5 key active for the CAT to register.
I'm recalling this from memory, as I haven't had the rig on for a few
months, but play with the various screens and it should be working as
expected. The interface has been working well for me.
Larry N0XB
Northfield,MN
At 05:48 AM 8/8/98 +0000, Sean Warner K0XQ wrote:
>
>Anyone have problems when using the W1GEE CAT interface & DX4WIN, with a
>1000D?
>
>Here's what happens.......I set the rig, baud rate to 4800, & polling rate
>to 1000 ms. I click 'save', & then the CAT light blinks once..........&
>only one. I know that DX4WIN flashes the 'EPROM 6.0 or better is required',
>but being fairly new to the 1000D (bought it used, about a week ago, serial
># 4G380031) I don't know the front panel 'button push(es) ' to check the
>firmware version. Manual says nothing.
>
>Any hints or help will be gratefully accepted & appreciated.
>
>TNX es 73 de K0XQ
>
>Sean Warner
>
>
>
>--
>FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
>Submissions: yaesu@contesting.com
>Administrative requests: yaesu-REQUEST@contesting.com
>Problems: owner-yaesu@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|