I had the same problem with a FT-900 in the same time frame.
Are you using an external speaker where the speaker ground has
a way to get back to the power supply AROUND the radio?
If so, you have a ground loop that can damage the audio output
if the radio ground is not perfect. It won't trash IC's. Just burns some
foil and gets you a stern talking to by the dealer. Good luck.
Dave WA0ZZG
> To: 1000mp@jehosophat.com, yaesu@contesting.com
> From: randy chapel <rchapel@impactdev.com>
> Subject: [Yaesu] I have no snd out on my FT-1000MP
To: <yaesu@contesting.com>
> Date: Sat, 13 Jun 1998 01:46:45 -0800
>
> Hi,
>
> I have no snd out on my FT-1000MP. The radio is less than 1 month old.
> I checked if key and panel beeper are on -- the menu says it is. When I
> turn the receiver knob and the S meter shows that I have a strong
> signal, I still have no snd out. I have performed the resets and still
> nothing. I can transmit.
>
> OK, I had another person look over the rig and we could not see anything
> that I might have done on the out set (SQL, RF knob off). We tried the
> ext. speaker jacks in the back and front and I still have nothing out.
> Basically, I can hear nothing out of the rig.
>
> Please advise.
>
> Randy Chapel
>
>
>
> --
> FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: owner-yaesu@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|