On Mon, 17 Feb 1997, Scott Tuthill <k7zo@micron.net> wrote .....
>Can someone e-mail me the mic pin out config
>for the FT-1000MP. I have one on order and
>want to make an adapter for my DVP cable
>which is currently wired for Kenwood.
>
>On the Kenwood, which is also 8 pins,
>the pins are:
>
ah well heres all my data - 8 pin mics
kenwwod yaesu icom
>1 = MIC 1 = up 1 = mic
>2 = STBY 2 = +5v 2 = +8v
>3 = DOWN 3 = down 3 = freq up/down
>4 = UP 4 = fast 4 = no connection
>5 = 8V 5 = gnd stby 5 = ptt
>6 = NC 6 = ptt 6 = gnd stby
>7 = GND/MIC 7 = mic gnd 7 = mic gnd
>8 = GND/STBY 8 = mic 8 = audio output
>
hope this agrees with everyone else, I have 1000mp. icom706, ts50 which
i use headset with 3 mic plugs on, but its not possible to use up/down
buttons :-)
--
Dave Norton
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & N4VJ / K4AAA
|