I'm fairly sure that Yaesu has a modification out for this problem.
Contact them!
You can send your radio in or they will FAX or mail the information to you.
73, Tyler K3MM
----------
From: Alberto Perello <ea3cr@redestb.es>
To: 'YAESU REFLECTOR' <yaesu@contesting.com>
Subject: [Yaesu] FT-1000MP
To: <yaesu@contesting.com>
Date: Monday, December 09, 1996 7:25 PM
Hello to all,
Since one year I have the FT-1000MP without problems, but in the last week
I find a problem only in the 18 and 21 mhz band.
When I transmit in USB/LSB in 18 or 21 mhz to my dummy load , the SWR comes
up to 3 or more, when my SWR in RTTY or AM at full power is only 1:1.
Of course, with my real antennas the problem is the same.
I tested to disconnect TNC, PC, DVS-2, Power amplifier, etc, but the
problem remains the same.
Any idea, or advice?.
Thank you in advance.
Alberto perello
EA3CR
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & KM9P
----------
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & KM9P
|