WriteLog
[Top] [All Lists]

Re: [WriteLog] FT-891 Setup in Writelog

To: "writelog@contesting.com" <writelog@contesting.com>
Subject: Re: [WriteLog] FT-891 Setup in Writelog
From: "Jim Johnson" <jim@kc4hw.com>
Date: Sun, 25 Jul 2021 21:03:06 -0500
List-post: <mailto:writelog@contesting.com>
Yes, typing the frequency in the call entry will change and actually display it 
properly, but it will not change when I tune the VFO...  and I can enter 
another frequency this way and it will change in the WL displayed.   

Joe/K4TV, I do have the radio in VFO mode as indicated by the A on the display.

Jim/KC4HW

----- Original Message -----
From: Robert W5AJ <woodr90@gmail.com>
To: 'Jim Johnson' <jim@kc4hw.com>, 'Keith Beebe W3KB' <keith@w3kb.net>, 
<writelog@contesting.com>
Sent: 7/25/2021 7:46:24 PM
Subject: Re: [WriteLog] FT-891 Setup in Writelog
________________________________________________________________________________

Can you type in 

7000 in the call entry field, hit enter and the radio frequency changes to
7000??

If not, the link isn't working
If yes, ....hummm

73 W5AJ

-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Jim
Johnson
Sent: Sunday, July 25, 2021 8:38 AM
To: Keith Beebe W3KB <keith@w3kb.net>; writelog@contesting.com
Subject: Re: [WriteLog] FT-891 Setup in Writelog

No sir!  I don't think it is, because I can spin the dial and the frequency
changes on the radio but not WL.  Actually, it is fully functional with
another logging program.

----- Original Message -----
From: Keith Beebe W3KB <keith@w3kb.net>
To: Jim Johnson <jim@kc4hw.com>, <writelog@contesting.com>
Sent: 7/25/2021 7:30:57 AM
Subject: Re: [WriteLog] FT-891 Setup in Writelog
____________________________________________________________________________
____

Is it possible you have the dial "locked" on the rig itself?  Unlock it, if
it is.

I had that happen to me before.

Keith W3KB


-----Original Message-----
From: WriteLog <writelog-bounces@contesting.com> On Behalf Of Jim Johnson
Sent: Saturday, July 24, 2021 11:24 PM
To: writelog@contesting.com
Subject: [WriteLog] FT-891 Setup in Writelog

I am having some trouble setting up the rig control for a FT-891 using
Writelog 12.59F.

I selected FT-991 from the Rig Type and the enhanced port on my laptop which
is Com7, baud rate 19200 that matches the radio menu setting, poll checked
and Comm PTT NO.  

I can enter a frequency in the QSO entry window and it will move the radio
to that frequency and display the frenquency properly.  But turning the VFO
know does not have any effect on the displayed frequency.  

Anybody, have any suggestion for this?

Jim/KC4HW
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>