WriteLog
[Top] [All Lists]

Re: [WriteLog] WRITELOG and WSJT

To: "writelog@contesting.com" <writelog@contesting.com>
Subject: Re: [WriteLog] WRITELOG and WSJT
From: Mike Seguin <n1jez@burlingtontelecom.net>
Reply-to: n1jez@burlingtontelecom.net
Date: Sat, 15 Dec 2018 07:58:49 -0500
List-post: <mailto:writelog@contesting.com>
Don,

Linked the wrong VSPE Setup.png. Sorry.

Here's the correct link. The split is COM15

https://drive.google.com/file/d/1-mbA6nD5f6IHNAMlG7BSPfb0mz6FWZI1/view?usp=sharing

On 12/15/2018 7:06 AM, Mike Seguin wrote:
Hi Don,

Here's info on the 64 bit side from EnterLogic:

====
License
Because of Microsoft Kernel Code signing requirement, we had to purchase digital signature (price is $499 per year), that is why VSPE is not freeware for 64 bit platform. For 32 bit platform though, VSPE is free.

For more detailed information please look at User license agreement.
====

The 32 bit version will run on 64 bit.

I run it typically with PowerSDR mRX PS with my ANAN-100 SDR, Writelog and WSJT-X.

Screen shot of my setup (VPSE setup)is here:

https://drive.google.com/file/d/1EXH86pHZ72MOOPIFHtLXXnBbaxfQQeD2/view?usp=sharing

I create two virtual (pair) ports and then split one. If I had a 'real' serial port on the radio, I would just create a splitter. Since I'm running SDR, it's virtual.

PowerSDR setup.png shows the radio virtual port setup:

https://drive.google.com/file/d/1dijYSpuuoX261yaeCiUykeICsQ3DUiO4/view?usp=sharing

Port sharing.png shows PowerSDR, Writelog and WSJT-X all running:

https://drive.google.com/file/d/1kmH7HGO-AsMp8qGQujvP5jqhBaVUmh-G/view?usp=sharing

You can see they all show the same Freq. WL and WSTX are polling PowerSDR via the splitter. There is also PTT via the splitter.

I run VSPE on startup (not as a service). I do this so it's easy to start/stop if I need make any changes or check performance. I do this by putting a shortcut in my startup folder (I'm running WIN10).

There are command line options for VSPE. My shortcut uses this:

"C:\Program Files (x86)\Eterlogic.com\Virtual Serial Ports Emulator\VSPEmulator.exe" e:\n1jez.vspe -minimize -hide_splash

The VSPE info screen shows the stats on the splitter. You can see WSJT and WL are connected.

https://drive.google.com/file/d/1534jgHGUqEu84PPltBE0VkbM0plU0MrC/view?usp=sharing

On 12/14/2018 10:46 PM, Don Hill AA5AU wrote:

Mike, can you tell us more about this program?

Thanks,
Don AA5AU

--

73,
Mike, N1JEZ
"A closed mouth gathers no feet"
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>