VSPE looks interesting. I'm confused as to why the 32-bit version is
freeware but the 64-bit version requires a license for $24.95.
I'm guessing the 32-bit version will work on a 64-bit machine, correct?
Mike, can you tell us more about this program?
Thanks,
Don AA5AU
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Mike
Seguin
Sent: Friday, December 14, 2018 11:52 AM
To: writelog@contesting.com
Subject: Re: [WriteLog] WRITELOG and WSJT
I use VSPE. Specifically with Writelog, N1MM+, WSJT-X, ACLog and VHFLog.
All work.
The "split" serial port created by VSPE can have 8 simultaneous connections.
On 12/14/2018 12:40 PM, Robert wrote:
> Corrected description, sorry, mind thought com port and wrote audio.....
> (error may repeat)
>
> It's with the COM port, both writelog and WSJT want to access COM2 for
radio
> info
>
> Loading WSJT first, then writelog produces error message:
> Com2 not available
> Access is denied
>
> And writelog has no frequency data. That's OK if only doing WSJT session
> and logging to writelog.
> Was there a com port sharing program or work around?
>
> 73 Robert W5AJ
>
> -----Original Message-----
> From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Don
> Hill AA5AU
> Sent: Thursday, December 13, 2018 10:15 PM
> To: writelog@contesting.com
> Subject: Re: [WriteLog] WRITELOG and WSJT
>
> Typically, Windows programs will share a sound card. That is what gives
many
> of us the ability to run several different type of RTTY decoders at the
same
> time - MMTTY, 2Tone, Gritty, etc.
>
> One solution would be to run WriteLog without Rttyrite. Then no sound card
> should be used by WriteLog unless you have a CW decoder window open (which
> you probably don't).
>
> Don AA5AU
>
> -----Original Message-----
> From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of
Robert
> Sent: Thursday, December 13, 2018 3:38 PM
> To: writelog@contesting.com
> Subject: [WriteLog] WRITELOG and WSJT
>
>
> When attempt to run writelog and WSJT - whichever I load first gets the
> audio board.
>
> I don't want to be turning audio board off on writelog to use WSJT and
> writelog is logging through UDP
>
> Solutions???
>
> 73 Robert W5AJ
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
--
73,
Mike, N1JEZ
"A closed mouth gathers no feet"
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|