probably %E at the end of the macro? Not needed for CW, but RTTY must know
your done.
On Fri, Jan 2, 2015 at 8:58 PM, Rich Hallman - N7TR <rich@n7tr.com> wrote:
> Im new to writelog and hope this is a simple fix.
>
> I installed WL with MMTTY on a new computer. I'm also using FSK Keying
> with a Rigblaster PLUS II USB on COM 13.
> When I installed WL with the MMTTYY plug-in as well.
>
> MMTTY works fine by itself and confirmed TX and RX is configured ok and
> works. I also had it working on the same computer with WIN-TEST.
>
> I configured RTTYRITE for COM13 and used Software generate FSK DTR. I also
> set MMTTY FSK PTT Port to NONE so RTTYRITE had no conflicts.
>
> When I press F1 and sends the macro....all the data looks correct and the
> radio transmits the data. But after sending the macro it never unkeys the
> radio unless I press ESC. I also see the PTT LED stays lit and CW LED
> flashes on the rigblaster until I hit ESC. This happens for all of the
> function keys that transmit.
>
> What am I missing?
>
> Thanks...
>
> Rich N7TR
> ex KI3V, N3AMK, WB3JOV
> www.n7tr.com<http://www.n7tr.com>
> http://www.qrz.com/db/N7TR
> Telnet: dxc.n7tr.com N7TR DXCluster
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
--
Keith Regli
mailto://keith@kregli.com
http://www.kregli.com
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|