Im new to writelog and hope this is a simple fix.
I installed WL with MMTTY on a new computer. I'm also using FSK Keying with a
Rigblaster PLUS II USB on COM 13.
When I installed WL with the MMTTYY plug-in as well.
MMTTY works fine by itself and confirmed TX and RX is configured ok and works.
I also had it working on the same computer with WIN-TEST.
I configured RTTYRITE for COM13 and used Software generate FSK DTR. I also set
MMTTY FSK PTT Port to NONE so RTTYRITE had no conflicts.
When I press F1 and sends the macro....all the data looks correct and the radio
transmits the data. But after sending the macro it never unkeys the radio
unless I press ESC. I also see the PTT LED stays lit and CW LED flashes on the
rigblaster until I hit ESC. This happens for all of the function keys that
transmit.
What am I missing?
Thanks...
Rich N7TR
ex KI3V, N3AMK, WB3JOV
www.n7tr.com<http://www.n7tr.com>
http://www.qrz.com/db/N7TR
Telnet: dxc.n7tr.com N7TR DXCluster
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|