Hi Rich,
Those settings will disable the DVK and WinKeyer. I added the WinKeyer in
order to get around corrupted Morse that was generated by the PC.
I selected the COM numbers for Rigblaster (COM6) and WinKeyer (COM7) in
WRITELOG.INI.
Comm PTT is related to rig control. I'm not using rig control (no rigs are
selected). Anyway, changing to NO doesn't "take" -- it gets changed back to
YES.
vy 73,
Bryan WA7PRC
>________________________________
> From: Rich <rwnewbould@comcast.net>
>To: Bryan Swadener <bswadener@yahoo.com>
>Sent: Thursday, June 26, 2014 7:15 PM
>Subject: Re: [WriteLog] WL DVK w/ Rigblaster Pro revised
>
>
>I cannot test this but I had a copy of the last contest log from our
>club. Here are the settings under PORTS
>
>DVK = NONE
>CW KEYER TYPE = PC GENERATES
>COM(number?) x the CW circle
>Comm PTT try both YES and NO
>
>Hope this helps
>
>Rich
>
>
>
>
>On 6/26/2014 6:12 PM, Bryan Swadener via WriteLog wrote:
>> Hi WL List Members,
>>
>> I've been going batty in trying to make WL (v10.78) work with my Rigblaster
>> Pro on SSB. At one time, it worked. However, a lot of time has passed and I
>> have added a WinKeyer USB to get rid of the corrupted Morse problem w/
>> WinXP. On CW, it now works fine but on fone, not so good.
>>
>> The Rigblaster box has a "Process" toggle switch that passes computer audio
>> to the rig only when it's in the "Process" position but does not pass
>> microphone audio to the rig in that position. And, when the switch is in
>> the "Process" position, it does NOT pass microphone audio to the rig.
>> Microphone audio is passed to the rig only when the switch is not in the
>> "Process" position. PTT works but, the only time the Rigblaster "PTT" LED
>> comes ON is when connecting to the PC when the PC sees it. I spoke with West
>> Mountain Radio support. We believe there's a problem with communication
>> between WL and the Rigblaster box, possibly a configuration issue in WL.
>>
>> The Rigblaster wants to be COM6, and the WinKeyer wants COM7. I've edited
>> CommSlot1 and CommSlot2 in the [PORTS] area of WRITELOG.INI to have those
>> values. Is there something more I need to do or change? I'm not trying to do
>> anything more... no rig or rotator control, etc.
>>
>> vy 73,
>> Bryan WA7PRC
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|