W4TV said:
It would help if you told us what transceiver you were using,
Kenwood TS-990S
what sound card your were using
USB Audio CODEC
how you do PTT
Serial Port
and how you connect
transmit audio from the sound card to the transceiver.
Donner Digital Interface (this connects the radio to the sound card and, with
RS-232, to PTT.
My guess is that you are using a Kenwood transceiver (TS-2000 or
TS-590)
Pretty good - Kenwood is correct - but it's the 990S (the new Kenwood)
and using the wrong PTT connection for your audio connection.
Could be, Joe, but why does the PTT work in MMTTY standalone? Also, I BELIEVE
that the PTT is working in Writelog Rttyrite because, as indicated in my post,
the radio goes into transmit, but the problem is that there is no sound and no
RF transmitted.
--
Albert C. Burnham
409 Summit Drive
Corte Madera, CA 94925
Cell: (415) 810-4839
FAX: (415) 924-6678
email: k6rim@pacbell.net
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|