On 4/1/2013 4:36 PM, Gary AL9A wrote:
2. Checking the Strict BPS setting in router and using the TU type of
XMMT.ocx with MMTTY and my normal COM PORT under Port solves the buffer
timing problem, but the transmit speed is significantly slower due to
the Strict BPS setting.
When you do this do you *close* all FSK ports - make sure Router shows
*closed* on *both* FSK ports before you check or clear the "Strict BPS"
box? Even better is to close all FSK ports in WriteLog and/or MMTTY
and set Router's FSK ports to *None* before changing the "Strict BPS"
setting.
The Eltima VSPAX appears to calculate the port timing *one time* when
the port is first opened by the application. If you change "Strict BPS"
without resetting the port - without *at least* closing and reopening
RTTYrite - the pacing *may not be correct*.
73,
... Joe Subich, W4TV
microHAM America, LLC.
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|