I control my MonstIR using my Flex 5000 radio with a program called DDUTIL
which automatically recognizes the split and makes sure the antenna stays tuned
to the TX frequency. DDUTIL also reads the Data OUt port on the SDA100 MonstIR
Controller so it can inhibit transmit on frequency changes. No external
hardware is needed other than a serial connection to Data Out Port.
DDUTIL does not work with legacy technology radios IcomKenYeasu variety.
__________________________________________________________
Howard S. White Ph.D. P. Eng., VE3GFW/K6 ex-AE6SM KY6LA
Website: www.ky6la.com
"No Good Deed Goes Unpunished"
"Ham Antennas Save Lives - Katrina, 2003 & 2007 San Diego Fires, 911
Sent from my iPad3
On Mar 6, 2013, at 6:33 AM, Don AA5AU <aa5au@bellsouth.net> wrote:
Dave, I also put my SteppIR in manual mode with operating split when the split
in frequency causes the antenna to tune.
I don't think there's anything you can do about it.
73, Don AA5AU
> ________________________________
> From: David Strout <djsatty@comcast.net>
> To: WriteLog <WriteLog@contesting.com>
> Cc: WA2TML <colabrese@comcast.net>
> Sent: Wednesday, March 6, 2013 7:15 AM
> Subject: [WriteLog] WriteLog and SteppIR
>
> Setup: WinXP; WriteLog, SteppIR Monstr
> Is there some way to get WriteLog to use the split freq (VFO B) for transmit
> when split is set? At present,
> in contests on 40M, I have to set the SteppIR control to manual to select the
> freq when in split and the xmit stn is received on VFO A. Tnx
> Dave, W2YC
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|