My SO2R set up has a pair of K3/P3/Amp combos. I'm using Array Solutions
band decoders and FilterMax IIIs plus an Eight Pak mast-mounted switch.
There are 7 feed lines being switched between the two stations and all the
communication is done through ShackLAN. I switch bands on a K3 and the
band-pass filter and correct antenna are switched before I can hit the
first 'dit.'
Rob K6RB
> Hi Mike:
>
> I have a SO2R setup, and have Yaesu Radio's send the BCD info to the
> decoder and when I Change Bands the decoders take care of everything,
> ie switching in the various filter within the Dunestar 600. Works
> like a charm and doesn't matter if the computer program controls the
> freq/band or I do it manually, the Bandpass filters are tracking the rigs
> Band.
>
>
> 73 De Mike
> VE3YF
>
> http://www.ve3yf.com
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|