Hello Mark,
After much searching on how to edit the sub bands, I finally found a
reference to the edit sub bands program by searching the reflector messages.
Once I found that in the writelog program directory, I used the Edit
sub-bands program to edit the phone portion of 80m to allow fone contacts from
3600
to 4000 khz. However, the change was not recognized by the Ohio Qso Party
module.
I had worked some guys on fone on 3650 khz, and had to change the frequency
in the log entry to 3755 khz in order for the module to count the qso as
"in band".
I must have spent 2 hours researching this problem. I found the WL
documentation to be of little help. However, thanks to you and another fellow
on
the reflector, I am now a happy camper, hi.
73 and many tnx, Geo...
George Wagner, K5KG
941-400-1960 cell
In a message dated 8/28/2011 1:47:26 P.M. Eastern Daylight Time,
k6ufo@arrl.net writes:
Hi George, It's not INSIDE the Writelog program. Don't run the program.
It's on the Programs menu when you go to the START menu, Writelog V10,
Edit sub-bands.
Mark Aaker K6UFO
from
[Georgek5kg] [Permanent Link][Original]
To: writelog@CONTESTING.COM, support@writelog.com
Subject: [WriteLog] Band Setup menu
From: Georgek5kg@aol.com
Date: Sun, 28 Aug 2011 12:37:43 -0400 (EDT)
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
WriteLog documentation describes a Band Setup menu. However, I cannot
find Band Setup in the application. Where is it?
George Wagner, K5KG
941-400-1960 cell
_________________________________
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|