Richard and Bob,
Remember that the FT1000mp (and I don't know for sure about the Mark
version) has a firmware bug that drops the CW PTT when commanded via the
CAT interface by WL. This is not a WL problem. I have always had to use an
external PTT signal to get CW to work on the FT1000mp.
Jerry, W6IHG
At 12:36 AM 11/22/2006 +0000, Richard L. King wrote:
>Hi Bob.
>
>I am having problems with my brand new MK2R+ with WL10.61E and those
>same radios also.
>
>My problem is that WL wont hold up the PTT to the second radio when
>you interrupt a CQ to call a multiplier. The PTT is only on long
>enough to send the first dash of my call on the second radio then it
>drops out immediately.
>
>Is this similar to your problems?
>
>73, Richard - K5NA
>
>
>
>At 00:26 11/22/2006, W7GG wrote:
> >I am looking for someone that has a new
> >MK2+ SO2R controller and uses it with Wlog
> >and FT-1000MP or MK5 radios.
> >
> >I am trying to get this combo to work at my
> >Qth and need a little help. I'm running Wlog 10.61E ....
> >
> >Help de Bob , W7GG
> >_______________________________________________
> >WriteLog mailing list
> >WriteLog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/writelog
> >WriteLog on the web: http://www.writelog.com/
>
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web: http://www.writelog.com/
------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|