Wayne,
Yes, the functions are on the right click context menu. BUT try selecting
the proper one quickly all the time as your eye hand coordination grows
worse. I have been using the Map feature on the right click context menu
recently rather than moving the mouse to the Fkeys panel.
Jerry, W6IHG
At 02:15 AM 4/14/2006 +0000, Wayne Matlock wrote:
>Has anyone looked at right mouse clicking the rttyrite/cw window and seeing
>if the menu that comes up there will satisfy demands. If you put the %L on
>the end of the "tu qrz" button, you can do all from there and never take
>your hand off the mouse...73 de
>
>Wayne, k7wm@arrl.net
>
>
> > [Original Message]
> > From: Jerry Pixton <jpixton@shentel.net>
> > To: James Sullivan <jims@psws.com>; <writelog@contesting.com>
> > Date: 4/13/2006 1:08:45 PM
> > Subject: Re: [WriteLog] Requested 3 Enter key sequence for RTTY in WL
> >
> > Jim,
> >
> > I am not arguing against the request. I made it many years ago also.
> >
> > I am only saying that there is more to the problem then having the cursor
> > not move when I click on a call but still move when I click on part of a
> > report. The "expected" behavior from Writelog is for the cursor to move.
> > That is what we have all learned will happen when we click on data. To
> > suddenly break this expected behavior just to use the "Enter send..."
> > functions needs some careful thinking through. It is not simple because
>it
> > ripples everywhere!
> >
> > I too have spent much time trying to understand the behavior of the
>"Enter
> > sends..." and why it doesn't work with a mouse. I also would like to just
> > click thru the whole qso without moving my mouse any further than the
>call
> > and the report.
> >
> > I too run a SO2R station and am working hard to reduce inefficient hand
> > movement so as to increase my rate. I too have mapped the "scroll wheel"
>to
> > the Enter key and tried that.
> >
> > I too would like to see an "Enter sends..." function that works. But
> > without breaking the expected behaviors of all the other function keys.
> >
> > Think thru and try what happens when you are using the other keys (not
> > Enter) to try to send an exchange and the cursor is in the wrong field -
> > that is not where you expected it. Most of the time you mouse click
>garbage
> > over you call entry field because it might be alpha numeric (and how many
> > stations send numbers and text all together)
> >
> > Most of us remove the RST field after the call field just because when
>the
> > cursor stops there instead of in the Report field we screw up.
> >
> > I am just saying "Be careful, there is a sand trap there". Your well laid
> > out key sequence has inconsistent behavior for the cursor when I happen
>to
> > use the Enter key vs happen to use some other key to send a message. We
>all
> > get quicker when things behave the way we expect EVERY time.
> >
> > We want to be able to use the Enter Key AND all the other keys at the
>same
> > time - not switch in and out of an "Enter Sends..." mode. It is bad
>enough
> > to learn to use a Shift-Enter to "log" (instead of Enter) without having
> > all the other keys change behavior when I what to use the "Enter sends..."
> >
> > BTW the 1st and 3rd states of "Enter sends" work right now - you just
>have
> > to do something different to send the report. A mouse that has more
>buttons
> > (I have a five button mouse) works to do that. I can send a full run
> > sequence without removing my hand from the mouse and not move the mouse
>to
> > the Fkeys panel.
> >
> > I think I pointed out that possibly one way to achieve a solution would
>be
> > to look to see if you have a call sign in the Call field (even when the
> > cursor is in the report field) and send the "run" report. And then move
>to
> > next state which sends the qrz message (don't know if the validity of the
> > report fields needs to be checked here or just leave that to the logging
> > function as it is now). Right now it seems that the position of the
>cursor
> > is what triggers a state change for the "Enter sends" function. I think
> > this is the dependency that must be removed in order for the "Enter
> > sends..." function to work without breaking the other key's behavior.
> >
> > Jerry, W6IHG
> >
> >
> >
> > At 09:41 PM 4/12/2006 -0700, James Sullivan wrote:
> > >Tnx to K0XU and W6IHG for their comments.
> > >
> > >As far as Fkeys goes it is a nice application.
> > >However, my requested change will benefit WL in a High qso rate RTTY SO2R
> > >contest.
> > >When you are trying to interleave QSOs on 2 radios you need to really
> > >minimize your mouse and hand movement.
> > >My requested change eliminates use of the keyboard while running
>stations in
> > >SO2R or SO1R.
> > >After hitting the left mouse button, I only have to press the Mouse wheel
> > >switch to send the exchange.
> > >I do not have to move the mouse from RttyView to the Fkey window. The
>mouse
> > >does not have to move
> > >
> > >Jerry, there is no sand trap because I am in 'Enter sends Exchange/QRZ"
> > >MODE.
> > >My Mouse wheel switch is mapped to the Enter key.
> > >Pressing the wheel switch proceeds to send the message mapped to the
> > >'SendCallExchangeKey' from the WL [Configuration].
> > >This MODE auto-advances the cursor to the Received exchange field for
> > >grabbing via the mouse.....
> > >
> > >This request is not noise. I am only asking for an optional ini entry to
> > >allow the 3 Enter key sequence to work in rtty.
> > >You can continue to use WL the way you want but you won't be able to use
>the
> > >3 Enter keys without this requested change.
> > >
> > >Jim W7EJ
> > >
> > > >Subject: Re: [WriteLog] Requested 3 Enter key sequence for RTTY in WL
> > > >To: Jim Rhodes <k0xu@iowadsl.net>, writelog@contesting.com
> > > >Cc: writelog@contesting.com
> > > >Message-ID: <5.2.0.9.2.20060412111229.02cb0fa0@pop.shentel.net>
> > > >Content-Type: text/plain; charset="us-ascii"; format=flowed
> > >
> > > >Jim, et al
> > >
> > > >Yes, I use Fkeys about 90% of the time. But I find having other
> > > >"convenient" keys mapped to the response sequence restful to the
>fingers.
> > >
> > > >I have been pointing out for a long time that the rtty behaviour for
>the
> > > >"Enter" function was broken because the cursor moves to the next field
>when
> > >
> > > >you mouse click a call.
> > >
> > > >However, I think there may be a "sand trap" here. What is being asked
>is
> > > >"Don't move to the next field after entering a call using the left
>mouse
> > > >button". This means when you next click on the report, the cursor is
>still
> > > >in the call field and you garbage the call with a report.
> > >
> > > >Think about this before too much noise is made.
> > >
> > > >Jerry, W6IHG
> > >
> > >---
> > >[This E-mail Scanned for viruses by Online Northwest]
> > >
> > >_______________________________________________
> > >WriteLog mailing list
> > >WriteLog@contesting.com
> > >http://lists.contesting.com/mailman/listinfo/writelog
> > >WriteLog on the web: http://www.writelog.com/
> >
> > ------------------------------------------
> > Dr. Jerry R. Pixton, PIXOS Designs LLC
> > http://www.pixos.com/designs/RadioTuner/
> > jpixton@shentel.net
> > ------------------------------------------
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|