HALLELUJAH
All is well. I loaded an old ini file from Writelog and it did the job with
a little modifications. MMTTY was working fine it was the writelog plug in
of rttyrite/mmtty that gave the grief but I want to thank all who had
suggestions and sincerely wanted to help.
I did save a .doc file that has screen prints of the writelog port setup,
the mmtty plug in setup and my .ini file if anyone is interested.
AGAIN- THANKS TO ALL!
On 4/18/05, KJ6RA <kj6ra@starband.net> wrote:
>
> Dick,
>
> That has happened to me before also. What I have had happen is under the
> "PORTS" section I have to make sure the bottom button is checked and the
> DVK is set to none. This usually fixes it.
>
> Rich KJ6RA
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Richard Zalewski
> Sent: Monday, April 18, 2005 11:11 AM
> To: David Hachadorian; Writelog
> Subject: Re: [WriteLog] [MMTTY] Help w/FSK
>
> Thanks for the hint Dave. I have seen sometimes where that gets changed
> but
> mine remains Sound + Com-TXD (FSK)
>
> Dick
>
> On 4/18/05, David Hachadorian <k6ll@adelphia.net> wrote:
> >
> >
> > >
> > > Writelog is ok for CW and SSB but will not work for RTTY. I have it
> > > using the MMTTY module. I guess the same module that works ok stand
> > > alone but with
> > > Writelog still just the steady tone. Since MMTTY works great now by
> > > itself
> > > this has me a bit up a tree.
> >
> > Hi Dick,
> >
> > Check this-
> >
> > In Writelog/mmtty window/setup/options/misc/select FSK.
> >
> > I've seen cases where this somehow gets changed by itself, resulting
> > in no fsk shift.
> >
> > Dave Hachadorian, K6LL
> > Yuma, AZ
> >
> >
> > >
> > > 73
> > > Dick
> > > W7ZR
> > >
> > > On 4/17/05, Richard Zalewski <dick.w7zr@gmail.com> wrote:
> > >> HERE IS ANOTHER CLUE!!!
> > >>
> > >> I thought I had it fixed but could not tell why or what I had done.
>
> > >> It seemed like everything was working fine. Then I looked down at
> > >> the radio and I was in USB mode. I in fact had the CW keying
> > >> plugged in to the RB plus. So I switched to RTTY mode and then back
>
> > >> to the old problem of steady tone. Well, that makes sense since I
> > >> have the CW keying in. I put the FSK plug from ACC1 in and no
> > >> change.
> > >>
> > >> Dick W7ZR
> > >>
> > >> On 4/16/05, S. Sneidar <sneidars001@hawaii.rr.com> wrote:
> > >> >
> > >> > Larry, could you info me a copy also. Tnx and Aloha.
> > >> >
> > >> > de sid ah6hh
> > >> >
> > >> > sneidars001@hawaii.rr.com
> > >> >
> > >> > ----- Original Message -----
> > >> > From: "Larry Gauthier (K8UT)" <K8UT@chartermi.net>
> > >> > To: <MMTTY@yahoogroups.com>
> > >> > Sent: Saturday, April 16, 2005 1:19 AM
> > >> > Subject: Re: [MMTTY] Help w/FSK
> > >> >
> > >> > >
> > >> > > Dick,
> > >> > >
> > >> > > I have {almost} the exact same setup: Pro II, RIGblaster plus,
> > >> > > MMTTY,
> > > FSK
> > >> > > mode, and it took me a while to get things working properly but
>
> > >> > > I can
> > > now
> > >> > > switch between SSB, CW, FSK, and PSK without any weird
> > > reconfiguration.
> > >> > >
> > >> > > It turns out that the RIBblaster Plus directions are wrong (or
> > >> > > at
> > > least
> > >> > > wrong for what I want to do), and I have written a short
> > >> > > description
> > > of
> > >> > > the
> > >> > > revised settings. Send me a valid email address and I'll
> > >> > > forward the
> > > file
> > >> > > to
> > >> > > you.
> > >> > >
> > >> > > -larry
> > >> > > K8UT
> > >> > > ----- Original Message -----
> > >> > > From: "Richard Zalewski" <dick.w7zr@gmail.com>
> > >> > > To: "MMTTY" <MMTTY@yahoogroups.com>
> > >> > > Sent: Thursday, April 14, 2005 18:02
> > >> > > Subject: [MMTTY] Help w/FSK
> > >> > >
> > >> > >
> > >> > >>
> > >> > >> I am using a Rigblaster plus, PRO III, and my sound card. I
> > >> > >> can copy fine but I can not get the rig to key properly. PTT
> > >> > >> works, but all I
> > >> > >> get is a steady tone. I am using MMTTY 1.65D.
> > >> > >>
> > >> > >> I have MMTTY setup Com-TXD and using the the comm port that
> > >> > >> the rigblaster is using. I have tried reversing Pin 1 & Pin 3
> > >> > >> connections
> > >> > >> to the mini connector to the audio out and no luck.
> > >> > >>
> > >> > >> --
> > >> > >> Tnx es 73
> > >> > >> Dick W7ZR
> > >> > >>
> > >> > >>
> > >> > >>
> > >> > >> Yahoo! Groups Links
> > >> > >>
> > >> > >>
> > >> > >>
> > >> > >>
> > >> > >>
> > >> > >>
> > >> > >>
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> > > Yahoo! Groups Links
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> >
> > >> > Yahoo! Groups Links
> > >> >
> > >> > <*> To visit your group on the web, go to:
> > >> > http://groups.yahoo.com/group/MMTTY/
> > >> >
> > >> > <*> To unsubscribe from this group, send an email to:
> > >> > MMTTY-unsubscribe@yahoogroups.com
> > >> >
> > >> > <*> Your use of Yahoo! Groups is subject to:
> > >> > http://docs.yahoo.com/info/terms/
> > >> >
> > >> >
> > >>
> > >> --
> > >> Tnx es 73
> > >> Dick W7ZR
> > >>
> > >
> > >
> > > --
> > > Tnx es 73
> > > Dick W7ZR
> > > _______________________________________________
> > > WriteLog mailing list
> > > WriteLog@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/writelog
> > > WriteLog on the web: http://www.writelog.com/
> >
> >
>
> --
> Tnx es 73
> Dick W7ZR
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
--
Tnx es 73
Dick W7ZR
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|