MAKING PROGRESS
Here is the latest after talking with WMR on the RB Plus problem. Best
suggestion was to try a different comm port. I told them I was not getting
any TXD regardless of the configuration of jumpers D9-12. I changed my comm
port from 2 to 4 and now I have FSK using MMTTY. Here are the conditions
however:
For RTTY or SSB jumper D9 and D13
For CW or SSB jumper D9, D12, and D13.
So it appears (and this was mentioned by several) that I will have to put a
switch on D12 so I can switch between CW and FSK RTTY.
NOW THE ADDITIONAL PROBLEM
WRITELOG
Writelog is ok for CW and SSB but will not work for RTTY. I have it using
the MMTTY module. I guess the same module that works ok stand alone but with
Writelog still just the steady tone. Since MMTTY works great now by itself
this has me a bit up a tree.
73
Dick
W7ZR
On 4/17/05, Richard Zalewski <dick.w7zr@gmail.com> wrote:
> HERE IS ANOTHER CLUE!!!
>
> I thought I had it fixed but could not tell why or what I had done.
> It seemed like everything was working fine. Then I looked down at the
> radio and I was in USB mode. I in fact had the CW keying plugged in
> to the RB plus. So I switched to RTTY mode and then back to the old
> problem of steady tone. Well, that makes sense since I have the CW
> keying in. I put the FSK plug from ACC1 in and no change.
>
> Dick W7ZR
>
> On 4/16/05, S. Sneidar <sneidars001@hawaii.rr.com> wrote:
> >
> > Larry, could you info me a copy also. Tnx and Aloha.
> >
> > de sid ah6hh
> >
> > sneidars001@hawaii.rr.com
> >
> > ----- Original Message -----
> > From: "Larry Gauthier (K8UT)" <K8UT@chartermi.net>
> > To: <MMTTY@yahoogroups.com>
> > Sent: Saturday, April 16, 2005 1:19 AM
> > Subject: Re: [MMTTY] Help w/FSK
> >
> > >
> > > Dick,
> > >
> > > I have {almost} the exact same setup: Pro II, RIGblaster plus, MMTTY,
FSK
> > > mode, and it took me a while to get things working properly but I can
now
> > > switch between SSB, CW, FSK, and PSK without any weird
reconfiguration.
> > >
> > > It turns out that the RIBblaster Plus directions are wrong (or at
least
> > > wrong for what I want to do), and I have written a short description
of
> > > the
> > > revised settings. Send me a valid email address and I'll forward the
file
> > > to
> > > you.
> > >
> > > -larry
> > > K8UT
> > > ----- Original Message -----
> > > From: "Richard Zalewski" <dick.w7zr@gmail.com>
> > > To: "MMTTY" <MMTTY@yahoogroups.com>
> > > Sent: Thursday, April 14, 2005 18:02
> > > Subject: [MMTTY] Help w/FSK
> > >
> > >
> > >>
> > >> I am using a Rigblaster plus, PRO III, and my sound card. I can copy
> > >> fine but I can not get the rig to key properly. PTT works, but all I
> > >> get is a steady tone. I am using MMTTY 1.65D.
> > >>
> > >> I have MMTTY setup Com-TXD and using the the comm port that the
> > >> rigblaster is using. I have tried reversing Pin 1 & Pin 3 connections
> > >> to the mini connector to the audio out and no luck.
> > >>
> > >> --
> > >> Tnx es 73
> > >> Dick W7ZR
> > >>
> > >>
> > >>
> > >> Yahoo! Groups Links
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> > Yahoo! Groups Links
> >
> > <*> To visit your group on the web, go to:
> > http://groups.yahoo.com/group/MMTTY/
> >
> > <*> To unsubscribe from this group, send an email to:
> > MMTTY-unsubscribe@yahoogroups.com
> >
> > <*> Your use of Yahoo! Groups is subject to:
> > http://docs.yahoo.com/info/terms/
> >
> >
>
> --
> Tnx es 73
> Dick W7ZR
>
--
Tnx es 73
Dick W7ZR
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|