Richard,
There is no split command for the FT847. And you can only command the Main
VFO. There is no Sub VFO command. You can command each VFO in the Satellite
mode but not in the normal mode.
So it is a radio problem not a Writelog problem
Jerry, W6IHG
At 08:25 PM 2/24/2005 +0000, Richard L. King wrote:
>I cannot get WriteLog to set split mode or set the sub VFO frequency on a
>Yaesu FT847.
>
>I have tried this by clicking on spots that show a split frequency and that
>sets the main VFO correctly, but it doesn't set split or the sub VFO.
>
>I have tried the "-" key and entered a split frequency. This doesn't set
>split mode and doesn't set the entered frequency in the sub VFO.
>
>I tried putting a split entry into the band map and then clicked on it. It
>sets the main VFO correctly but not the sub VFO or split.
>
>Is this a Writelog oversight, a radio compatibility, or might I be doing
>something wrong?
>
>The main VFO frequency entry seems to be working fine.
>
>Thanks.
>
>73, Richard - K5NA
>
>k5na@texas.net
>
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web: http://www.writelog.com/
------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|