WriteLog
[Top] [All Lists]

Re: [WriteLog] Stuttering CW

To: Jim McDonald <jim@n7us.net>
Subject: Re: [WriteLog] Stuttering CW
From: Rick Tavan N6XI <rtavan@gmail.com>
Reply-to: Rick Tavan N6XI <rtavan@gmail.com>
Date: Mon, 21 Feb 2005 13:13:40 -0800
List-post: <mailto:writelog@contesting.com>
I should clarify some of my remarks about WinKey vs. Writelog. First,
Jim is correct, the board kit costs $28, not the $39 that I misstated.
Second, my stuttering problem was in fact while using telnet to
receive spots, not true "packet" via a VHF radio link.  telnet might
actually be worse in this respect because it runs at high speed.

Finally, allow me to retract at least part of my disparagement over
timing of paddle sending. I figured out that some (not all) of my
timing problem was due to the final space character that I place at
the end of all Writelog messages.  Writelog recommends this so that
multiple messages will concatenate cleanly with a space in between.
But WinKey takes the space literally and won't send paddle-formed
characters until after the space time expires. This makes it awkward
to perform a transmission that starts with a WL message and concludes
with manual sending.  I fixed it by replacing the space character at
the end of each message with an element space (up-carat ^).

Also, the paddle can interrupt sending instantly but Winkey seems to
need just a little time before it will accept real paddle sending
after an interruption.  So I hit either paddle, pause for about an
element time and then continue with paddle sending.

I think the benefits of synchronized paddle and message speed and
paddle interruption of message sending outweigh the workarounds
described above. I will likely use the Winkey for both computer and
paddle sending. I may, however, connect a conventional keyer in
parallel with the WinKey output with its own paddle for a variety of
contest-critical sending chores.

I like the WinKey and consider it quite a bargain compared to some
other keying/switching solutions on the market.

/Rick N6XI 


On Mon, 21 Feb 2005 04:45:56 -0700, Jim McDonald <jim@n7us.net> wrote:
>
> It's very configurable, so it can compensate for rigs that shorten
> characters, can send Curtis A or B from the paddle, etc.  It can even send
> Farnsworth.  The price is $28, and the newly-available enclosure for $19
> would have saved me lots of time, both shopping and cutting a DB9 hole.
> 
> ...
> The WinKey is the keyer that's included in the microHAM USB micro KEYER,
> which is what I'd be using if I didn't have the serial ports.  The $179
> price seems extremely reasonable considering what it offers and the time one
> would save by not stuffing the board and assembling the WinKey.  It's at
> http://www.microham.com/mk.html.
> 
> K1EL's web site is http://www.k1el.com/.
> 
> Incidentally, I'm wondering if the problem with high spots rates from packet
> would be alleviated if telnet were used instead of packet, since it's so
> fast compared with 1200 baud packet.
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>