Why don't they use some of the funds from
the sale of the program to reinvest in a new compiler???????
On Thu, 3 Feb 2005 15:17:33 -0500 "Stan Staten" <stan.staten@verizon.net>
writes:
> I have been told that their compiler is not the latest. I offered
> and
> if others do likewise, we can buy them the latest and greatist
> compiler/program package. They are not that expensive if a number
> of us
> chip in.
>
> 73 Stan, N3HS
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Wayne
> Sent: Thursday, February 03, 2005 12:56 PM
> To: writelog@contesting.com
> Subject: Re: [WriteLog] CW keying on LPT1 with XP
>
>
> Hi All,
>
> I tried this with two different computers, one AMD 3200+, the other
> P4
> 2.4G, and after 3 days of adjusting addresses, playing in
> writelog.ini,
> trying both of the free external programs, going through reading all
> the
>
> older post on this and any help files I could find, I failed to make
> it
> work. The only common factor was WL software and trying to get LPT
> port
> keying of CW which works fine without any add-ons with 2 other
> programs.
>
> My bottom line is if the authors of the program call it a Windows
> program
> and have it working in Win9X, then it should be made to work in
> WinXP as
>
> this IS a Windows operating system. You shouldn't need to spend any
> more
>
> time or effort getting something to work that has been shown to be
> readily
> available in other programs. LPT port keying of CW is seamless in
> other
> programs with WinXP.
>
> By the amount of posts on this subject, it is obvious that this
> "feature"
> of WL needs attention.
>
> I also wonder if anyone else has noticed that after installing WL,
> if
> the
> radio, FT1000MP in my case, is on while the computer is booting up,
> the
> rig
> tries to transmit 2 or 3 times during the bootup process. This seems
> to
> be
> occurring after I tried to get MMTY integrated with WL. If I pull
> the
> comport attached to the interface for sound card RTTY the problems
> is
> not
> there.I now have to be sure the rig is off when booting the
> computer.
> Anyone else come across this? Is there something I've done wrong to
> cause this?
>
> If nothing else, I've learned more about LPT port addresses than I
> ever
> wanted to know! <G>
>
> 73,
>
> Wayne WA1PMA
>
>
>
>
>
> At 09:23 AM 2/3/2005 -0600, you wrote:
> >After reading there comments on the cw keying I decided to try it
> last
> >night. I had recently upgraded to Win/XP from Win98SE and I had
> been
> >keying cw with WL on a comport.
> >
> >Looking at the Port setup on WL all the LPT ports where grayed out.
>
> >After
> >I ran the program Userport and re-booted I now have LPT1 and LPT3
> open
> and
> >both work fine CW keying my rig.
> >
> >One note, the Writelog.ini file address for LPT1 ~ 3 need to be the
>
> >same
> >as what Windows has listed.
> >
> >So bottomline is that it works fine.
> >
> >But my other problem is that in DXBase2005 I can't get it to send
> CW
> >from
> >the LPT port, go figure??
> >
> >Joe K0BX
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|