You can bring up a bandmap on vfo B (I've done it on my ts-940 when working
split, just to see if anyone is spotted near my tx frequency). Unfortunatly I
can't seem to get two entry windows - one on each vfo. Writelog gets really
confused when I tell it that both entry windows should look at com1 for the rig
data. Too bad this doesn't work, it would certianly be nice.
73 de Al, KE1FO
----- Original Message -----
From: G3SJJ
Sent: 5/7/2004 4:13:28 PM
To: d.desloovere@skynet.be;writelog@contesting.com
Subject: [WriteLog] SO2V
> Thanks Dirk and also Jochen DH5HV. The answer seems to be number 3, ie that
> Writelog isn't able to accommodate this at the moment.
>
> I first used S02V about 20 years ago with my TS930 and paper logging. Whilst
> CQing on VFO A, I would keep switching to VFO B to find a new station to
> work. I use this technique now with the FT1000MP. I am surprised that people
> go straight from SO1V to SO2R without first trying SO2V. Maybe if WL could
> accommodate it more operators would try SO2V. (That is not a criticism of
> WL)
>
> Chris G3SJJ
>
> -----Original Message-----
> From: DESLOOVERE DIRK [mailto:d.desloovere@skynet.be]
> Sent: 07 May 2004 12:01
> To: G3SJJ; writelog@contesting.com
> Subject: Re: [WriteLog] RTTY SO2V
>
>
> Dear Chris,
>
> I am running my mark V in a so2v config with writelog, but it is not working
> like n1mm does.
> I prefer still writelog for some reasons .
>
> The support of so2v has been announced but no support or help files yet.
>
>
> For ansering ur question : it is 3
>
>
> 73
> DIRK
> ON4ADZ
>
> ----- Original Message -----
> From: "G3SJJ" <g3sjj@btinternet.com>
> To: "Writelog Reflector" <writelog@contesting.com>
> Sent: Thursday, May 06, 2004 10:49 PM
> Subject: [WriteLog] RTTY SO2V
>
>
> > I've renewed my subs and downloaded 10.47E so hopefully this third try
> will
> > get through. Out of curiosity I have just looked at the website for N1MM
> > Logger, (I have no intention of changing over) and noticed that SO2V
> (Single
> > Operator 2 VFOs) was selectable. I didn't look any further but suspect it
> is
> > what my 2 previous postings were asking about.
> >
> > What I want for CW and SSB is to display VFO A and VFO B in the 2 Log
> Entry
> > windows when you select Radio, Number of Radios (ie VFOs), 2 and for them
> to
> > track the VFOs.
> >
> > I have followed instructions from the AA5AU, K9JY sites and the recent
> info
> > posted by G3SEK, but I cannot even get VFO B to display any frequency of
> VFO
> > B. (FT1kMP, WL10.47E) So :
> >
> > 1 - Have I got it set up incorrectly?
> > 2 - Is there a bug?
> > 3 - Is it unachievable?
> >
> > Chris G3SJJ
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.672 / Virus Database: 434 - Release Date: 28-04-04
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
> >
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.678 / Virus Database: 440 - Release Date: 06-05-04
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.678 / Virus Database: 440 - Release Date: 06-05-04
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|