> 2.) When you first open the OQP module, you must fill out the Contest
> Parameter OHIO QSO PARTY SETUP screen with Call, Station Location and
Station
> Information. Once you OK that screen, you then enter the contest module.
On two
> occasions I had to close WL, and later open the OQP module with the same
file
> name. I had to reenter all the information again on the OHIO QSO PARTY
SETUP
> screen. IMHO, this step should be bypassed altogether when reopening an
> existing contest file, since the information has already been supplied.
I do have a fix for this -- and if you used the OHQP module this past
weekend
and would like to try this out here's what you can do:
1) download and install the latest OHQP beta module
http://wlmods.n9oh.com/OHQP_WL_1.0.0.3.exe
2) load your OHQP log and enter your station info (call, class, etc...)
3) save the log
4) exit WriteLog
5) load your OHQP log -- your station info should be "remembered"
If you try this out please email me directly and let me know that you
verified that it works.
tnx
/steve n9oh
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
|