I -told- you I was only partially awake! *FSK* is on the TxD pin, so you
can have it all!!
----- Original Message -----
From: "wa9als" <wa9als@starband.net>
To: <k0bx@qsl.net>; <writelog@contesting.com>
Sent: Saturday, August 24, 2002 7:14 AM
Subject: Re: [WriteLog] RigControl & Soundcard PTT/FSK on same port?
>
> > I thought I had read that someone did this with a 'Y' cable??
> >
> > It looks like it almost can be done,
> > 9 pin connector
> >
> > pins (2) TXD and (3) RXD for rigcontrol
> >
> > pin (7) RTS or (4) DTR for PTT
> >
> > But that leaves us without a pin for FSK??
> >
> > Any Ideas???
> >
> > Joe K0BX
>
> Hi Joe - I'm only partially awake so far, but I think the "Y" cable
referred
> to was as above, except with PTT on RTS and -CW- on DTR. What you need is
> PTT VIA RIG CONTROL. Assuming your rig supports that, you should be all
> set. 73
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>
|