On Thu, 14 Feb 2002 22:55:06 -0500 "WA9ALS - John" <wa9als@starband.net>
writes:
> Next I opened 2 instances of MMTTY - you don't have to have 2
> separate
> instances of MMTTY folders/installed - just use your usual shortcut
> to
> open 2 instances of the same program. Then in Options, MISC, set
> different device IDs for the 2 programs - I used 0 for the first
> instance and 1 for the second. Plugged in the audio to the
> appropriate
> (separate) inputs, and there it was - working FB! MANY THANKS!
That was very helpful. Thanks!
I find now that when I start Writelog, both copies of MMTTY come
up with the same device ID. Sometimes they are both 0, and sometimes
they are both 1. The second one to load comes up with a "sound card
not available" error. So I go over to Options on the first one, see
what its device ID is (0 or 1), and then go over to Options on the
one that is NOT working and change it to the other device ID, then
everything works FB!
I don't know how all this is going to run on a Cyrix 200MMX, but
we'll see.
Dave Hachadorian, K6LL
Yuma, AZ
K6LL@juno.com
|