Bruce,
I don't think so. Since USB and R-232 are completely different technologies,
conversion from USB to DB9 takes a little more than a cable. It takes a USB
to serial port hub. Unfortunately, I haven't had good luck with those and a
number of others have reported problems with them as well. I would look for
a PCI buss serial port card. There are a few on the market but unfortunately
the ones I have found seem to be outrageously expensive. I would appreciate
comments from anyone who has found a reasonably priced 4 serial port PCI
card.
-------
73, Rich - W3ZJ
> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of SavageBR@aol.com
> Sent: Monday, September 10, 2001 9:40 AM
> To: Writelog@contesting.com
> Subject: [WriteLog] MP connection?
>
>
> I have been using a DB-9 to DB-9 cable to connect my notebook PC
> RS232C port
> to the CAT jack of my MP. My new PC has only USB ports (two). Am
> I correct in
> assuming there is a standard USB to DB-9 cable available for a similar
> connection?
>
> Bruce
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|