Thanks Jon...
So, I understand that I need to click "ok" instead of "save configuration."n
But what does "command rig from com port" have to do with it? rig control
is working fine.
Now, on the IC-765, I don't think I can disable the VOX. Both the VOX, and
full break-in buttons on the radio's front panel need to be depressed for
full break in to operate. Keep in mind also that everything works fine in
DX4WIN--I just have to fiddle with things before keying starts to work in
WriteLog.
73,
Frank
----- Original Message -----
From: Jon Harder <jon@praxisworks.org>
To: Frank Grossman (WB2BXO) <flgrossman@earthlink.net>;
<writelog@contesting.com>
Sent: Sunday, July 15, 2001 11:22 AM
Subject: Re: [WriteLog] ini setings for LPT keying
> Frank,
>
> Not sure about the W1WEF I/O , but LPT CW with the simple one transistor
> I/O shown in the Help file, using "Setup Ports" is a simple way that
works
> for me, with no need to edit the INI file manually for CW ops. In the
left
> hand column headed "CW" just click on the button for LPT1. Since you have
> your rig control on Com 1, (check this also while you're in Setup Ports,)
> go down to the CWPTT button and set it for "Command Rig on Com Port."
Then
> do Setup, Save Configuration when you're through. Also be sure you don't
> have VOX enabled on the rig. (On my TS-850 I leave the VOX/MAN button set
> to MAN. )
>
> 73 de Jon, K1US
>
> ----- Original Message -----
> From: "Frank Grossman (WB2BXO)" <flgrossman@earthlink.net>
> To: <writelog@contesting.com>
> Sent: Sunday, July 15, 2001 5:44 AM
> Subject: [WriteLog] ini setings for LPT keying
>
>
> >
> > I send CW with the W1WEF LPT keying cable when using CT, Writelog and
> > DX4WIN, but I seem to have a hard time getting the keying function to
> start
> > in Writelog. (Works fine with DX4WIN and CT) I suspect the problem is
a
> > lack of experience with the program, but it occurred to me that there
> might
> > be a simple solution--set up LPT keying in the .ini file instead of
going
> to
> > setup | ports, clicking the LPT1 button and "computer generated," each
> time
> > I start a CW log.
> >
> > I set up rig control on com-1 in the .ini file, but don't know what to
do
> > for keying on LPT1.
> >
> > Thanks and 73,
> > Frank
> > wb2bxo@arrl.net
> >
> >
> >
> >
> > --
> > WWW: http://www.writelog.com/
> > Submissions: writelog@contesting.com
> > Administrative requests: writelog-REQUEST@contesting.com
> > Problems: owner-writelog@contesting.com
> >
> >
> >
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|