Hi Steve, I am using the Rotor E-Z and Writelog with GREAT success!!
You have to go into setup/ports/and then set the DCU1 compot (left) to
the port that you have the rotor on.
After you did that then click OK, but in the setup menu, make sure you
hit the "Save configuration" item. You need to get the rotorport =to
you comport
as an entry in the writelog.ini file.
If it doesnt work, make sure you go back to the setup/port and see if it
is still set correctly.
Let me know if you need any other help. But mine works like a champ.
Joe K0BX
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|