Hi Mark, I am not sure of the hookup on the PK-232DSP but on the older PK-232
there is a flat connector for audio and PTT. There is another connector, a
round one that has the FSK output on it. So make sure that you are using it
and not the AFSK that is on the flat connector.
I have a article on the PK-232 on my webpage, http://www.qsl.net/k0bx that
shows the hook up for the PK-232 to TS-850S. So be very similar to your TS-940.
Joe K0BX
On Tue, 22 August 2000, "Cherry, Mark" wrote:
>
>
> Hello all Writelog folks,
>
> I am interested in interfacing my pk232mbx/dsp tnc to my TS940sat for FSK
> use. The 232 is the upgraded dsp version and would also like to take
> advantage of the filters of the 940 in FSK mode.
>
> So far the connections from the rig to the tnc seem complete.
>
> If I configure WriteLog for the pk232 tnc and set the com port, WriteLog
> will talk to the tnc. If I attempt to transmit from WriteLog, it will not
> key the rig. The keyboard entry window will accept input, but no rf. If I
> hit the SEND switch on the 940, or use my footswitch, it will transmitt. So
> for the most part, the interfacing is working. The problem is keying the
> rig automatically.
>
> I currently have CW and PTT keying functioning, but will not key in the FSK
> mode.
>
> Any thought would be greatly appreciated.
>
> Thanks in advance for your assistance.
>
> Mark Cherry, WT6P
> Sacramento, CA
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
k0bx@qsl.net
http://www.qsl.net/k0bx
_______________________________________________________________________
Free Unlimited Internet Access! Try it now!
http://www.zdnet.com/downloads/altavista/index.html
_______________________________________________________________________
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|