> So far the connections from the rig to the tnc seem complete.
>
I think you need to tell us more specifics about your connections. You
shouldn't need any special interfacing from the computer for keying the rig
per se, just for controlling the TNC. You just need to tell Writelog which
com port the PK-232 is on - You also then have to have the appropriate
wiring from the FSK and PTT outputs of the PK-232 to the FSK and PTT inputs
of the rig (OR from the PK232 to the AFSK and PTT inputs of the rig if you
prefer AFSK). GL
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|