found it.
In order to get into VHF contesting mode in WSJT-X, in Settings, General
"Enable VHF/UHF/Microwave Features" must be checked. Then a tab will appear
on the main screen for the VHF Contest mode.
Chuck W5PR
On Sat, Jun 9, 2018 at 8:45 AM, Chuck Dietz <w5prchuck@gmail.com> wrote:
> Where is the switch in WSJT-X to go to NA VHF Contest mode? I thought it
> was at the bottom of the main screen.
>
> Chuck W5PR
>
> On Sat, Jun 9, 2018 at 9:58 AM Marshall-K5QE <k5qe@k5qe.com> wrote:
>
>> Hello Ladies and Gentlemen.....the contest is getting close. I wish
>> everyone the best of luck. Please remember to send GRIDS not -12. I saw
>> a bunch of folks sending only K5QE K3XXX -02 rather than K5QE K3XXX
>> {grid} for their first transmission. Remember that in the contest, the
>> exchange is {GRID} not 59 or -12.
>>
>> Also remember that if the band is open, SSB is MUCH faster than FT8.
>> You will make a lot more contacts in a given time on SSB if the band is
>> open than you will on FT8 or MSK144. The point of a contest is to make
>> as many QSOs as possible, after all.
>>
>> We finally have our dedicated FT8 station working(what a pain), so we
>> will be looking for FT8, even if we are running SSB or MSK144.
>>
>> Again, GL in the contest....
>>
>> 73 Marshall K5QE
>> Phone at the shack is 409-787-3831 if you want to call and sched us.
>> Remember, NO contact details may be exchanged.
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting@contesting.com
>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>>
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|