VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] What separates a decent trans.........

To: vhfcontesting@contesting.com
Subject: Re: [VHFcontesting] What separates a decent trans.........
From: Bill Schwantes <bill4070@gmail.com>
Date: Wed, 25 Apr 2018 09:30:46 -0600
List-post: <mailto:vhfcontesting@contesting.com>
You've gotten a bunch of great answers to your question and I agree with
all of them.  Perhaps another question could be asked:

"What defines a transverter that's good enough?"

There are two main factors that drive the definition of what's good enough.
1) How will your transverter be used? and 2) Where are you located? There
are other factors but they're less important.

If you'll be using your transverter for moon bounce (EME) communications
you'll need one that has the best receive performance possible.  You'll
also need rock solid frequency precision and stability. You'll need the
ability to separate elements of your transmit and receive systems; you may
want to locate the receiver front end and the transmit amplification
elements near the antenna(s) to minimize feedline losses and associated
noise management. You may also benefit from having your receive signals
visually displayed on a bandscope, especially in the microwave bands.

If you're participating in terrestrial contesting on CW and SSB your
performance requirements may be lower because there are many other factors
which could render your transceiver's performance less important.

If you intend to compete using a rover station you'll be much more
interested in durability, low power drain and uncomplicated operational
features.

Your location is also important.  If you operate in a densely populated
area you're much more likely to appreciate good receive selectivity and
transmit signal purity.  If you live in a low density RF quiet are like I
do, you're likely to do fine with the cheapest  transverter available. New
transverters are usually better but an older "tailgate special" may meet
your needs just fine.

Closing comments:  Transverter makers are competitive and most improve
their products to meet evolving market demands.  Many of the comments you
hear may be true but outdated.  My advice is to jump in, keep your mind and
your eyes open and stay curious.  You'll have a lot of fun and learn a lot
along the way.

73 Bill W7QQ
DM75ao
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [VHFcontesting] What separates a decent trans........., Bill Schwantes <=