Hi to everyone interested in this topic....I was told by someone that I
trust that the problem is that LOTW was implemented on the back of a
defective standard....namely, the .adi "standard". That "standard" does
not have your grid in it, so LOTW has no idea where you were when the
contact was made. The .adi standard works best when you are a fixed
station so that your grid does not change. The Cabrillo files DO have
your grid in them, but apparently, you can't get LOTW to accept a
Cabrillo file(maybe it will, I don't know). This is why if you operate
from 10 grids, you have to separate the contacts into 10 different
files, sign them, and submit 10 different submissions rather than one.
For me, this is an AAAAAAAaaaaaaaRGH!!!
I have posted before that the ARRL has the clout to have announced that
there will now be a new .adi standard, we will call it .ad2 that solves
these problems, but they did not. I have no idea what a .ad2 file
should look like, but it should not be too hard for the computer jocks
to work it out.
To paraphrase Tim, "LOTW was not designed.....".
73 Marshall K5QE
On 10/16/2017 4:49 PM, K7XC Tim Marek wrote:
Nope, that remains the standard as LOTW wasn't designed to easily implement
Multi Grid VHF Operations.
I wish I knew code to implement an automatic parser that would separate all
the Grids automatically then submit them for each separately.
In this day of lightning fast super computers on everyone's desk it remains
a mystery why such laborious manual tasks still exist when submitting a log
to LOTW.
Then again it was created with an HF bias with VHF added as an
afterthought.
73s de Tim - K7XC - DM09jh... sk
(PS: My log contains 6M operations from over 127 different grids and I have
yet to manually sort all that out and submit it, so don't feel bad)
On Mon, Oct 16, 2017 at 5:17 PM, Mark Spencer <mark@alignedsolutions.com>
wrote:
Hi:
I've been procrastinating about uploading my logs to the LOTW site (:
Part of the reason I tend to put this task off is the need to go thru the
go thru the .adi files on each of the computers I run wsjt-x on and
generate separate .adi files for each grid that I have operated from. Once
I have these files I can then sign them and upload them to LOTW.
Has anyone figured out any easy way to do this and if so would you mind
sharing this with me ?
Thanks and 73
Mark S
VE7AFZ
mark@alignedsolutions.com
604 762 4099
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|