VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] Setting up new station

To: vhfcontesting@contesting.com
Subject: Re: [VHFcontesting] Setting up new station
From: Michael Murphy <michael@k5mbm.com>
Date: Thu, 3 Nov 2016 12:00:03 -0500
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
Thank you all who responded.  You've all given me something to think about.

Following on some of the advice given, I am going to shoot for FM only in the January contest. I will not have moved to the new location yet so it won't be optimum, but it will be a start. All I really need to do is get a 6 meter FM antenna up. I already have a Comet CX-333 for 2, 1.25 and 70cm. I am thinking of getting a Dominator 6M antenna from Norwalk Electronics. It will handle 1500 watts and is highly rated.

Right now my antennas are mounted on 20' poles attached to the eave of the house. I have 10 segments of Rohn 25g to put up at the new location, but I am thinking of a temporary 30' setup with the 6M antenna attached to the top. Along with setting up the logging software, I should be able to get it all done by the January contest.

As somebody said, this will give me experience in the process from beginning to end and afterwards I can evaluate what needs to be improved.

Again Thanks,

Michael Murphy
K5MBM
EM20

On 10/29/2016 11:13 PM, Michael Murphy wrote:
This is an opinion question, so tell me your opinion and why you feel the way 
you do.  I have been wanting to get into vhf contests, but haven't got it all 
together yet.  I currently have a Yaesu 450D and 100D.  Also have 3 Tyt 9000 
(2m, 1.25m and 70cm FM).  I will be moving in a few months and have been 
thinking about the new shack and thinking of upgrading the equipment.  So if 
you were to start from scratch to build a decent single operator station 
primarily for Vhf contest (I've be doing HF just fine with what I've got now), 
what equipment would you use?  I like that the Elecraft K3 has support for 
multiple transverters.  I also like the Icom IC-9100 for its 2m and 70cm 
capability, but no transverter support.  When it comes to tranverters, I like 
the way the Elecraft transverters work with the K3, but Demi has more band 
choices.  As far as antennas go, I've only got a triband vertical for the FMs.  
So any thoughts and comments are welcome.


Sent from my iPad
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>