VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] Entering as a Mobile (/M) in Contests

To: Mark Spencer <mark@alignedsolutions.com>, vhfcontesting@contesting.com
Subject: Re: [VHFcontesting] Entering as a Mobile (/M) in Contests
From: Darryl Holman <djholman@u.washington.edu>
Date: Tue, 16 Jun 2015 12:08:06 -0700
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
Mark,
Not really. General rule 3.7 specifies a 500' circle for all stations (which is modified in the VHF rules for rovers). See: http://www.arrl.org/general-rules-for-all-arrl-contests

Best,
  Darryl
  ww7d

On 06/16/2015 11:55 AM, Mark Spencer wrote:
I don't think it is the intention of the rules to exclude mobiles. Looking
at the rules to see whare a mobile can fit, I see no restriction as to why
a mobile cannot simply enter as single operator. In the VHF rules, only
portable stations are restricted from moving. In the general rules,
everything must be contained within a 500 ft circle. In a mobile it is --
its all in one car. Did I miss something?



Hi, I figured the intent of the rule was to prevent me from operating outside 
of the 500 ft circle within a single grid, unless I chose to operated as a 
rover. In my case it eventually helped prompt me to actually rove to other 
grids (which is probably what the authour of the rules had in mind ??) For some 
time though it prompted to operate from home vs gamble that my chosen portable 
location in my home grid was going to be productive. In years gone by I vaguely 
recall working from more than one location in a grid and not entering a log in 
the contest. I figured nothing stopped me from handing out contacts as a non 
contest participant (:












_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>