VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] HELP! Looking for stacking info on 1.2GHZ yagis

To: "Joe Serocki" <joeserocki@gmail.com>, <vhfcontesting@contesting.com>, <nlrs@mailman.qth.net>
Subject: Re: [VHFcontesting] HELP! Looking for stacking info on 1.2GHZ yagis
From: <w0eea@sbbco.net>
Date: Sat, 29 Nov 2008 18:25:21 -0700
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
Subject: [VHFcontesting] HELP! Looking for stacking info on 1.2GHZ yagis


> I have two and a splitter and phasing harness, 22 element beams, but how
> far apart? Looking for recommendations. I want to increase gain but not
> reduce beam width.
> Thanks
> Joe Serocki, N9IFG
>

Joe the increase in gain comes from narrowing the beam width.

If you stack them vertically the vertical beam width is narrowed.  Stack 
them side by side
to narrow the horizontal beam width.  Vertical stacking distance is 26". 
Horizontal 28".

I have seen recommendations for slightly smaller stacking distances of 24" 
and 26" but
I believe the wider spacing is better.  M2 shows even tighter spacing for 
their current
22 el yagis but their splitter is based on out of phase mounting of the 
antennas so it
wouldn't apply here.

73,  Jim   W0EEA




_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>