VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] K4GUN 6m Par Moxon and DC Rotors

To: "Bill Olson" <callbill@hotmail.com>, "VHF contesting list" <vhfcontesting@contesting.com>
Subject: Re: [VHFcontesting] K4GUN 6m Par Moxon and DC Rotors
From: "Rogers, Ron" <RR124640@ncr.com>
Date: Tue, 27 May 2008 08:48:34 -0400
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
Agree with Bill.......

All of the popular named rotors I have ever owned (CDE, Hygain,
Alliance, Yaesu, Kenpro, etc) all use 24 volt AC motors in the rotor in
conjunction with a motor capacitor switch in to change direction of the
motor through the AC voltage phase delay. I believe only one model of
the Yaesu rotors uses a DC motor.

  

Ron 
WW8RR

-----Original Message-----
From: vhfcontesting-bounces@contesting.com
[mailto:vhfcontesting-bounces@contesting.com] On Behalf Of Bill Olson
Sent: Tuesday, May 27, 2008 5:16 AM
To: VHF contesting list
Subject: Re: [VHFcontesting] K4GUN 6m Par Moxon and DC Rotors


Hi all, While the readouts run on DC, the CDE/HyGain Ham-X series MOTORS
run on 24v. AC..

bill, k1DY




> From: n8um@comcast.net
> To: k4gun@comcast.net; vhfcontesting@contesting.com
> Date: Mon, 26 May 2008 20:42:44 -0400
> Subject: [VHFcontesting] K4GUN 6m Par Moxon and DC Rotors
> 
> Nice setup.  I looked at your pictures.  Is your 6 meter Moxon mounted

> backwards with respect to your other antennas?  I think it might be a 
> driven element and reflector...  Therefore the wire reflector element 
> should be behind the square aluminum driven element.  Any other guys
got an opinion?
> I have misplaced my assembly sheet.
> 
> Most rotators (Yaesu, Ham X series, Emoto, Alliance) run on 24vdc so 
> there is no need to buy a dc rotor.  I just bought a controller from 
> MDS. It replaces my 110vac control box with a digital display and 
> computer interface.  The MDS controller uses a simple 2.5mm 13.8v dc 
> hook up and supplies 24vdc for most rotator series.  Pretty slick and 
> half the price of other digital controllers.  See  
> http://www.mds-ham.com
> 
> John B.  N8UM  Oak Ridge, Tennessee
> 
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>