VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] VHF/UHF SWR Meter

To: "'Les Rayburn'" <les@highnoonfilm.com>, <vhfcontesting@contesting.com>
Subject: Re: [VHFcontesting] VHF/UHF SWR Meter
From: "Joe Serocki" <joeserocki@gmail.com>
Date: Tue, 15 Apr 2008 12:54:50 -0500
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
Depends, good or cheap? For cheap I use the one from DC Ace, it's about
$40something. It works well to the 440 band. However, I would not keep it in
line because it has issues with power > 100 watts and has a little loss. On
the other it has a great display and works totally well!

Joe Serocki, N9IFG
www.welcars.org
www.stonedmonkey.org
www.tke-nu-iota-alumni.org/
www.venturecrew743.org
www.foxlaketroop85.org
IRLP Node 4239
 
If you don't like it SPIN THE DIAL!
Quando omni flunkus moritati!
America is returning to the values Scouting never left.


-----Original Message-----
From: vhfcontesting-bounces@contesting.com
[mailto:vhfcontesting-bounces@contesting.com] On Behalf Of Les Rayburn
Sent: Tuesday, April 15, 2008 12:45 PM
To: vhfcontesting@contesting.com
Subject: [VHFcontesting] VHF/UHF SWR Meter

While putting together a new Directive Systems DS224-8R antenna last night,
I realized that I lack even basic test equipment for 222mhz. 

I'd like to add an SWR/Wattmeter that covers 144/222/432, and would prefer
"N" connectors for the inputs and outputs. Can anyone recommend one that
will perform well. Low power for all bands, nothing over 300 watts. 

Thanks in advance for the advice.

73,

Les Rayburn, N1LF



Les Rayburn, director
High Noon Film
100 Centerview Drive Suite 111
Birmingham, AL 35216-3748 
205.824.8930
205.824.8960 fax
205.253.4867 cell
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>