VHFcontesting
[Top] [All Lists]

[VHFcontesting] Re: VHF/UHF antenna switch

To: <vhfcontesting@contesting.com>
Subject: [VHFcontesting] Re: VHF/UHF antenna switch
From: cboone@earthlink.net (cboone@earthlink.net)
Date: Thu Jun 19 16:44:24 2003
Use a triplexer.......Comet and Diamond make them.....allows you
to use the feedline on all three bands at the same time! Why switch
when you lose the other 2 bands at the time???  Since the 
UHF side is a HP filter, it MAY work ok up to 1296...but not sure..
have never tested one on an analyzer up that high...

Chris
WB5ITT

n3ra wrote:
> 
> I have a 6m, 2m and 440 MHz antenna that I would like to share a feedline
> between.  Any suggestions on a remote antenna switch that will work well at
> these 3 freq's?  Comments on the switches abilities through 1296 MHz would
> also be appreciated and interesting.
> 
> Finally, I have the same question about a manual, in shack switch for these
> 3 bands.
> 
> All feedback is very much appreciated.
> 
> 73
> 
> Scott, N3RA

<Prev in Thread] Current Thread [Next in Thread>