Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn BX 56 Hardware Needed

To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Rohn BX 56 Hardware Needed
From: Kirk Kleinschmidt via TowerTalk <towertalk@contesting.com>
Reply-to: Kirk Kleinschmidt <sohosources@yahoo.com>
Date: Sun, 28 Aug 2022 23:51:41 +0000 (UTC)
List-post: <mailto:towertalk@contesting.com>
Careful!
Those non-Rohn bolts aren't "shouldered," they're probably "full thread" and, 
if so, are specifically not recommended for BX towers apps.
Please investigate.
Regards,
--Kirk, NT0Z

My book, "Stealth Amateur Radio," is now available from www.stealthamateur.com 
and on the Amazon Kindle (soon) 

    On Sunday, August 28, 2022 at 06:54:02 AM CDT, Jon Zaimes, AA1K via 
TowerTalk <towertalk@contesting.com> wrote:  
 
 Keith,
My 1990s Rohn catalog says the leg connecting bolts are SAE Grade 5 steel.
For sections BX-8 through BX-4, 9/16" x 1" bolts are used (48 needed).
For sections BX-3 and BX-2, 3/8" x 3/4" bolts are used (12 needed).
Diagrams show lock washer under each nut.
Such hardware readily available from many sources, such as McMaster Carr or 
your local 
Tractor Supply. 
https://www.mcmaster.com/bolts/hex-head-screws/medium-strength-grade-5-steel-hex-head-screws/
Base specs and diagrams here: 
https://criticaltowers.com/bx%20series%20towers/Documents/Sandown%20Wireless%202014%20TBX%20Catalog.pdf
Base stubs and tilt base: 
https://criticaltowers.com/bx%20series%20towers/web%20pages/BX%20Series%20Tower%20Page.htm

73/Jon
Jon P. Zaimes, AA1KTower climber for hireFelton, 
Delawarehttp://www.aa1k.us/Cell: 302-632-2353 Reviews of AA1K tower work on 
eham website: http://www.eham.net/reviews/detail/12922 Hug your favorite tower 
every day, and always stay connected to it.

-----Original Message-----
From: Keith Dutson <kdutson@sbcglobal.net>
To: Towertalk Reflector <towertalk@contesting.com>
Sent: Sat, Aug 27, 2022 8:30 pm
Subject: [TowerTalk] Rohn BX 56 Hardware Needed

I have a used BX 56 but no hardware for assembly or foundation.  Would 
appreciate info on where to purchase the hardware.  Thanks.
73, Keith NM5G 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
  
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>