Dave,
If you Google “N4UH open wire”, one of the first results will be a scan of Ham
Radio magazine from the late 70’s/early 80’s that has an article that N4UH
wrote about using 200 ohm, 4 conductor open wire line for doing exactly what
you describe.
I have no idea how well it works or how big of a pain it is to deal with, but
seems like an interesting concept, especially if you have the time to play
around (or have access to a few thousand feet of wire at a good price).
73, Ken N2ZN
> On May 16, 2022, at 6:39 PM, dave arruzza via TowerTalk
> <towertalk@contesting.com> wrote:
>
> To all...
> I have a new QTH and the towers for the monoband yagis will be 500-600 feet
> away from the shack.
> I remember reading about utilizing 2 transformers and open wire line to
> minimize loss.
> One transformer at the tower base to transform the yagi coax to open wire.
> A run of open wire line to another transformer at the shack end.
> Then coax to the shack.
> I know that I can buy hardline to accomplish this but that becomes costly.
> 73 Dave W1CTN / 4
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|