Thanks for the work, Steve. You are a good man and we appreciate it.
73...Stan, ZF9CW
On Tue, Feb 1, 2022 at 11:22 AM VE6WZ_Steve <ve6wz@shaw.ca> wrote:
> Today I uploaded a YouTube video describing my new 9 circle combiner board
> PCB design that has small Murata SMD CMCs on each RG-6 feedline.
>
> I include PCB file links to download in both KiCad format or a zipped
> Gerber folder if you want to build your own. A BOM and an image of the
> schematic is included as well.
> This is the 9-circle array that was designed by John W1FV.
>
> I review why we need these CMCs, I talk about these small Murata chokes
> and some VNA tests I did and how these same units can be used as Magic-T’s.
> The new design also has a pin-out for the vcc and relay control lines, has
> the option for gas discharge tubes on the vcc and control lines, and the
> board has a slightly larger footprint than my previous designs so its its
> easier to access the F-connecters for field installation.
>
> The evaluation is still on-going at VE6WZ, but the board tested very well
> in the shop with the VNA, and I used it this weekend for the CQWW 160m test
> and it performed well.
>
> I know there are many that don’t like to watch a video, and I may build a
> PDF document, but in my prior life, all I did was make technical/
> scientific documents and I’d rather not do that anymore.
> It’s much easier to say things quickly in a video. If a picture is worth
> a 1,000 words, then a video is worth a million.
>
> https://youtu.be/lVW1CmrzP7c <https://youtu.be/lVW1CmrzP7c>
>
> 73, de steve ve6wz
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|