[TowerTalk] Shunt Feed Assistance Needed

[RVZ via TowerTalk <towertalk@contesting.com>]

Hi Guys,

I'm working on shunt feeding my 120' tower on 160m. using a RigExpert AA-650.  
I've located the 50-ohm tap point on the tower but am getting strange readings 
on the AA-650 when I add capacitance in series with the shunt wire.  I'm hoping 
that someone familiar with the RigExpert and Shunt-Feed systems will contact me 
off-list to help me fine tune my shunt-fed Vertical.   Thank You & 73,  Dick- 
K9OM RLVZ@aol.com 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk