Group,I am new to using rotors and I have a dumb question : Will the rotor
brake work if the rotor is on its side ?
Specifically, I am installing a hex beam and I noticed that I could rotate the
shaft while the tower is lowered with the rotor parallel to the ground.
I hooked up the rotor cable and box. and was able to drive the rotor and
clearly the brake solenoid would engage.So, I removed the rotor and put it on
the bench. When I removed the cover and exposed the solenoid and wedge,
everything looks fine.
The rotor is a Ham M series with upgraded steel gear.
TNXde KA4JVYMark
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|