I have also had a couple of Yaesu G-2800DXA rotators and I had no slippage
or breakage issues with their clamps. Follow the installation directions
carefully.
John KK9A
W3YY wrote:
I've used the Yaesu G-1000DXA and G-2800DXA on 100ft and 120ft towers for 20
years and have never had their mounting brackets fail. I also now use the
Green Heron controllers. I would suspect that the failure reports you heard
were because the rotators were installed improperly.
73, Bob - W3YY
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|