Towertalk
[Top] [All Lists]

Re: [TowerTalk] Force12 rebuild

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Force12 rebuild
From: Mac <libbysales@austin.rr.com>
Date: Sun, 22 Dec 2019 14:11:19 -0600
List-post: <mailto:towertalk@contesting.com>
HB= Home Brew  ...made it myself sorta thing ..  mac/mc  w5mc

On 12/21/2019 4:26 PM, Richard Smith wrote:
  Hi Jim,
Sorry to sound dumb, but what is an hb coil?
73, Rich, N6KT
     On Saturday, December 21, 2019, 02:13:15 PM PST, Jim Thomson 
<jim.thom@telus.net> wrote:
Date: Fri, 20 Dec 2019 14:01:20 -0600
From: N5KM - Kris <n5kilomike@gmail.com>
To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: [TowerTalk] Force12 rebuild


<Im rebuilding my Force12 40m yagi. What would you recommend as replacement
<for the alumoweld linear loading wires? Some of these wires have snapped in
<the past due to years of vibration.

<Note: as part of the rebuild I am adding truss supports for the 3 elements
<in order to remove the stress on the linear loading wires.

<Kris N5KM

##  replace the  LL alumoweld  fubar  with hb  coils...  like  either  al  or  cu.  Use  
dacron  rope  for the
new  truss supports.

##  Dont  even  think  about using SS  wire..... the losses are beyond  sky  high.  It  will  
break  anyway,  cuz  of  metal fatigue.
Stranded  CU wire  would  work,  but hb coils are simpler.

Jim  VE7RF
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>