Towertalk
[Top] [All Lists]

Re: [TowerTalk] "experts" on loading towers on low bands

To: <towertalk@contesting.com>, "David Gilbert" <xdavid@cis-broadband.com>
Subject: Re: [TowerTalk] "experts" on loading towers on low bands
From: "Bob Shohet, KQ2M" <kq2m@kq2m.com>
Date: Tue, 10 Sep 2019 18:24:14 -0400
List-post: <mailto:towertalk@contesting.com>
Actually we are saying the same thing.

1) Build it and put it up!

2) Take it down or adjust it and put it back up again.

3) Repeat as needed.

4) Get on and make lots of q’s and have fun

In each case you clearly have a specific design in mind – a model or plan 
whether computer generated, hand drawn or something else, with measurements 
that we use to build what we put up.  We don’t just invent it in our head with 
random materials and random measurements and slap it together.

In addition, while modeling programs are based on math and theory, they are far 
from absolute; especially when dealing with terrain where the measurements are 
not absolute either.  And all computer programs have points of inflection where 
the results change greatly based on the tiniest of dimension changes and those 
dramatic result changes are artifacts of software program limitations.  Anyone 
who does a lot of computer modeling knows that.  Theory is not the same thing 
as reality.  Modeling programs are “guestimates” at best.

The rest of your comments are not worthy of a response.

Bob  KQ2M


From: David Gilbert 
Sent: Tuesday, September 10, 2019 6:01 PM
To: towertalk@contesting.com 
Subject: Re: [TowerTalk] "experts" on loading towers on low bands


You and N5OT aren't saying the same thing at all.  He said to just 
experiment and see what works well enough to be acceptable, while you 
said you ignored the practical experience of other hams (stuff that 
"works" or doesn't) and instead used a modeling program (which is based 
purely on math and theory) to make your decision.

It's odd to see two guys pat each other on the back for reinforcement 
when they don't even understand they have opposite stances.   Whatever 
happened to logical thinking?

Dave   AB7E


On 9/10/2019 1:44 PM, Bob Shohet, KQ2M wrote:
> Mark has nailed it!
>
> One of the nice things about making something and seeing it it works well 
> enough is that what you make doesn’t know how well it is supposed to work and 
> doesn’t care.  :-)
> So if it works it works regardless of what anyone thought beforehand.
>
> Usually if it works (and no one thought it would), we find out long after the 
> fact why it worked, and generally it was something that wasn’t known or 
> understood at the time, and now the field advances with the “Gee, I wonder 
> why it works so well?” study and discoveries afterwards.
>
> Simple example...  I wanted to put up a 4-stack on 15 meters when I built my 
> station.  I new that I needed heights of 30’, 60’ and 90’, but with 100’ of 
> tower it didn’t seem to make sense to put another 15 above that.  The 
> thinking was that even on a tall mast, the 90’ and another 15 at 109’ would 
> be too close and would phase poorly especially if they were pointed in 
> different directions.  Everyone that I asked about this said so.  These guys 
> built great stations and are great ops.  You know all of their calls.  But I 
> modeled the stack with K6STI’s YO and it looked GOOD!  I asked them again.  
> “NO!  I would not do it” came the answer in unison.   Thankfully I did my 
> homework beforehand and I chose not to listen to the advice of people that I 
> respect.
>
> So I built it and put it up anyway.  The 5L at 109’ was and is a KILLER!, 
> especially when in phase with the 90’.  I believed the modeling over my 
> terrain.  The software was correct and my 15 meter experience has been 
> awesome for the past 20 years.  (And I have thanked Brian, K6STI many times 
> over the years)
>
> Before I put it up I reasoned that if it didn’t work I could always take it 
> down.  But if it did work, I would never want to!  :-)   Very high reward to 
> risk ratio!
>
> Moral of the story:  Model it, build it well, put it up and see how it does!
>
> 73
>
> Bob KQ2M
>
>
> From: Mark - N5OT
> Sent: Tuesday, September 10, 2019 4:11 PM
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] "experts" on loading towers on low bands
>
> I'm a big fan of "experiment trumps theory" and basically I have spent
> nearly 50 years doing the following:
>
> 1. Make something.
> 2. See if it works well enough.
> 3.  If it works well enough, you're done.  If it doesn't, change
> something and see what happens.
>
> Clearly I'm just an amateur.  But because I'm on TowerTalk™ I can say I
> make "educated guesses."
>
> Love you guys,
> 73 - Mark N5OT
> (intended to be humorous - everyone carries a bucket of gasoline in one
> hand and a bucket of water in the other - they get to choose which one
> they throw on the fire - I choose water) (most of the time)
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>