Just make sure to have mics as well so ypu can listen for the scary cracking
sound!
Phil
N9LAH
Sent from Xfinity Connect Application
-----Original Message-----
From: nv8a@charter.net
To: richard@karlquist.com, n9lah@comcast.net, towertalk@contesting.com
Sent: 2019-07-05 8:33:01 AM
Subject: Re: [TowerTalk] HDX 555 Motor Drive BEaring
And it shows the flaw in my assumption that, now that I could set up a
WiFi-connected camera to watch the tower as it moves up and down, remote
control would be OK.
Alan NV8A
On 7/4/19 6:07 PM, Richard (Rick) Karlquist wrote:
> Yet another example of why you should never use
> the remote control box to control these units
> from a distance.
>
> Rick N6RK
>
>
> On 7/4/2019 2:08 PM, Phil Snyder wrote:
>> Hi All
>>
>> Went out this morning to crank up the tower to see if I could hear any
>> of the EU on 6 meters. as soon as it started up I heard a couple
>> cracking noises. I stopped and tweaked it up and down a little and
>> discovered that the flange bearing on the back side of the multi wrap
>> sheave failed.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|