Towertalk
[Top] [All Lists]

Re: [TowerTalk] Request for replacement bearing information for tower ra

To: Scotty <scotty@ashiko.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] Request for replacement bearing information for tower raising fixture
From: Kim <whensley11@comcast.net>
Reply-to: Kim <whensley11@comcast.net>
Date: Sat, 25 May 2019 19:27:25 -0500 (CDT)
List-post: <mailto:towertalk@contesting.com>
Scotty, 

Contact Ray at isheaves.com

He's working with several hams to line up a run of pulleys to meet our needs.

73, Kim - WG8S


> On May 25, 2019 at 2:49 PM Scotty <scotty@ashiko.com> wrote:
> 
> 
> I have a US tower TX-455 that tilts over.
> 
> The bearing in the top of the raising fixture's sheave needs replacing.
> 
> The matching sheave on the tower has the same bearing and is still in good 
> shape.
> 
> I can press out the old bearing and press in a new bearing.  
> 
> Can someone please tell me the brand name and model number of the
> 
> bearing that they have used for this replacement?
> 
> Bearing bore size is about 12 mm.  OD is about 42 mm. Width is about 13 mm.
> 
> The worn out bearing says: NICE PHILA K8
> 
> Sincerely appreciate any help.
> 
> Scotty W7SW
> 
> 
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>